Tag Archives: heavy machinery

Best Practices When Moving Heavy Equipment

When it comes to transporting heavy equipment, you need to be ultra-cautious to ensure that the equipment reaches the destination safely. To do this you need to observe a set of best practices.

Best practices before loading the equipment

You need to ensure that you don’t exceed the transport vehicle’s gross weight rating and/or gross combination weight.

If the equipment is too large, determine whether you need permits for oversized or overwidth movements. These loads may additionally necessitate warning flags, lights, and oversized or wide load banners.

Are there any loading requirements for the equipment, such as the usage of locking pins, brakes, specific transmission gear, outriggers, or deck wideners? You should find them.

As a rule of thumb determine where you will place the equipment on the transport vehicle to ensure proper weight distribution and securement.

Heavy equipment movers also recommend that you check the equipment’s securement points for wear and damage. If they are damaged, don’t use them.

If there will be friction between the equipment and the transport vehicle (for example, metal crawler tracks on a metal deck), consider if you need friction devices.

If the item you need to move has rubber tires, check the pressure. Low pressure may cause the tiedowns to loosen.

Remember to remove any excess aggregate, dirt, debris, or other materials that could fall or reduce friction during transport.

Best practices when loading the equipment

You shouldn’t operate or load equipment that you are unfamiliar with or cannot operate safely. When possible, put the equipment against a vehicle structure to help prevent forward movement, unless weight distribution or securement considerations prevent this.

To avoid damaging brake or hydraulic lines or cylinders, attach securement devices with caution.

Remember to use edge protection to safeguard the tiedowns and equipment.

Whenever possible, use the equipment manufacturer’s designated connection points and adhere to the manufacturer’s securement guidelines.

Attach each tiedown as close to the vehicle’s front and rear as practicable. You can also attach it to mounting points on the vehicle specifically built for that purpose.

Do not use any attachment point with doubtful strength or compatibility.
Chain is the main tiedown method for large equipment and machinery. Ensure that no links are strained or have nicks.

Use direct tiedowns whenever possible, but keep in mind that you require more tiedowns than indirect tiedowns.

To keep wheeled vehicles from moving, place chocks, cradles, wedges, or other measures against the wheels. These devices require security.

Best practices after loading the equipment

You need to lower all ancillary equipment and movable parts, such as hydraulic shovels, booms, plows, crane arms, and so on, and secure them to the transport vehicle with tiedowns.

For the accessories with locking pins or similar devices that prevent movement in any direction, you do not need to secure them with additional security measures.

Hydraulics alone are insufficient to secure auxiliary equipment so if possible use additional units.

If the equipment being transported has an articulation point, pivot, or hinge in its design, secure or constrain the vehicle or equipment to prevent articulation during transit.

You need to secure accessories and other items not attached to the equipment to the transport vehicle in accordance with the normal cargo securement rules.

When doing this, confirm the vehicle’s true height and breadth.

Perform all needed en-route security assessments.

Have minimum tiedown requirements

If the loaded vehicle has crawler tracks or wheels, you need at least four tiedowns to prevent the equipment from moving side-to-side, forward, rearward, and vertically.

You should note that an indirect tiedown routed through an anchor point and attached to both sides of the trailer is considered a single tiedown.

You can use a chain as two tiedowns provided it is appropriately linked to two anchor points with two binders and has slack in the middle, ensuring that a break in the chain does not affect each tiedown.

For peace of mind, the total working load limits of the tiedowns must be at least 50% of the cargo’s weight. If the cargo weight is unknown, you may need more tiedowns.

You can attach the tie-downs near the front and back of equipment, or at the mounting locations of the equipment intended for that purpose.

Ensure that you play by the load securement laws

During Roadcheck, inspectors will largely do the Level I inspection, which is a thorough 37-step examination of the vehicle and the driver’s credentials.

To ensure that you are on the right size, ensure that spare tires, loads, goods, tools, and dunnage are securely fastened and do not fall, blow, spill, or leak off the vehicle, or roll or shift while in transportation.

Also, ensure that there are enough tiedowns for the weight and length of the equipment being transported.

Check for faulty tiedowns, which may be loose, torn, broken, crooked, or knotted. If you have a problem, fix it immediately.

Inspect the anchor points and buildings for damage. You also need to confirm that you observe commodity-specific cargo security standards at all times.

Parting shot

These are some of the things you should do to ensure that your load is safe at all times during transportation.

You can do the transportation by yourself but for the best outcome, let an experienced heavy machinery moving company handle the work.

The beauty of hiring a company is that you are sure that they will deliver your equipment safely and without any problems. You are also sure that they will pay attention to all the laws and your equipment won’t be held on the road due to lack of compliance.

When you are hiring a heavy machinery moving VA company, don’t hire the first one that you come across. Instead, take your time to find a reputable one who will have the necessary equipment and experience. Don’t take risks on a piece of expensive equipment.

7 Situations When You Have To Move Heavy Equipment

If you use heavy equipment in your projects, there are plenty of reasons you might consider moving the equipment from one point to the other. Some of these reasons as given by heavy machinery moving experts include:

You need to replace the machine

Machines, like other systems, have an expected lifespan. After reaching that threshold, machines require part replacements or, in certain circumstances, full removal.

Replacements are also necessary when the equipment becomes obsolete or is broken beyond repair. Running broken or obsolete machinery will cause more harm than good.

It will not only slow down production and increase costs, but it will also pose a risk to everyone involved. When you are looking to replace your old or malfunctioning machinery, you need experienced machine movers to remove the machinery and install new equipment.

You need to relocate the machine

Is your business outgrowing its current space? Are you seeking a facility with cheaper rent and overhead? Moving or replacing your equipment may be necessary if you want to relocate your operation.

Rather than investing money in new machinery, you should consider hiring a professional rigging company to move your heavy equipment.

If you are relocating the machinery from one section of the business to the other, you can use your own forklifts, air bearings, and other equipment to move the equipment. However, if you are moving the equipment from one state or town to the other, you will need to hire a company to help with the relocation.

You are redesigning the site

Finding the ideal arrangement for your work site can be challenging. As you work, you might find a better and more efficient arrangement and you have no other way out other than to move the equipment around to fit the new arrangement.

You are discarding old equipment

You need to decommission and discard machines as soon as they reach a certain performance level and begin to lose efficiency. However, the size of rejected pieces can vary, and they must be removed from the facility before scrapping.

Such a large-scale movement necessitates the use of expert movers to transport it to the appropriate disposal location.

You are upgrading to better machines

Machines and their components require constant upgrades for optimal functioning. Upgrade parts can be of various sizes, ranging from small screws to massive dynamos and generators.

To avoid damage, you need to ensure that all improvements are transported and unloaded with extreme caution. Depending on the size of the part, movers load and unload the machine using equipment such as air bearings or crane systems.

You are selling the equipment

You can downsize, relocate, or make changes regularly, and often dispose of or sell your old equipment. Discarding occurs when a machine has completed its life cycle and has outlived its usefulness.

If the machine is still functional or requires minor repairs, the best way to handle it is to sell it. When you sell the machinery, you will need expert movers to transport it to the new owner’s location.

Why do you need a professional mover when moving heavy machinery?

Regardless of the reason you are looking to move heavy machinery, you should always hire a professional company to help you out.

If you have your team that can do the moving you must be wondering why you should hire a professional to help you out, right? Well, there are plenty of reasons you should do it. These reasons include:

You reduce the risk of injury

You are familiar with your machine and are aware of its weight and size. Regardless of your motive for moving, it will be extremely unsafe for your employees to try to move it. In some cases, one of your employees may get injuries, and you may incur financial costs.

Hiring a rigging company ensures that your machinery is moved securely by skilled specialists who adhere to their guidelines.

When you are hiring moving professionals, always hire experienced ones with an insurance policy. This way you are sure that even if an accident happens, you won’t be responsible for compensating them.

You don’t strain your moving equipment

Moving big machinery necessitates the use of specialist equipment capable of safely handling the weight of the object being moved. If your equipment fails when transferring your machinery, it may cause harm to critical components of your machine.

Professional rigging companies provide skilled machinery moving contractors with the necessary rigging equipment to properly transport and preserve your machinery throughout the relocation.

You save time

Moving large machinery while trying to do your daily tasks is not only a physical drain on your employees and equipment, but it also wastes time.

Instead of having your employees complete jobs that they excel at for your firm, moving equipment diverts their attention away from the skills they provide to your team.

With a trained rigging business, the jobs are accomplished swiftly and efficiently, allowing your personnel to focus on what will help your business flourish.

Also, if you attempted to move the machine, you would have spent too much time doing it because you don’t have the right machine or skills for the task. With professional movers, they have the right equipment for the task. At the same time, they have been doing the moving tasks for too long which means that they complete the tasks fast.

You exonerate yourself from responsibility

As mentioned, moving heavy equipment comes with plenty of risks. The heavy equipment can fall, and people can get hurt, among many other risks.

When there are too many risks involved, the last thing you want is to be responsible for the outcome.

When you hire heavy equipment movers VA, you lift all of the responsibilities off your shoulders and place them on the shoulders of the equipment movers. They will be responsible for anything that happens to the equipment and the people handling the equipment.

To be safe, ensure that you hire an insured company. As mentioned, when you hire an insured company you are sure that the insurance company will handle the responsibility should anything happen.

Ways to Avoid Accidents When Handling Heavy Equipment

heavy equipment moving

As much as they come in handy when doing heavy work, heavy machinery can be highly risky and lead to expensive accidents. Thankfully, there are a number of things you can do to reduce the risk. Plenty of things can go wrong when you are moving heavy machinery, so you should be ultra-cautious when doing it.

To help you out, here are tips given by heavy machinery moving experts on how to transport the equipment safely.

Be cautious when transporting the equipment

As mentioned, when moving the equipment from one place to the other, you need to be ultra-cautious and avoid accidents. As a rule of thumb,, you must ensure that you are working with reputable machinery moving company.

Other than this, you need to:

Ensure that the transport vehicle’s gross vehicle weight rating and/or gross combination weight rating are not exceeded.

Determine whether permits for oversized or over width movements will be necessary. These loads may also necessitate warning flags, lights, and oversized or wide load banners. If this is the case, get them.

Find out if there are any loading requirements for the equipment, such as the usage of locking pins, brakes, a specific transmission gear or deck wideners.

Find out where the equipment will be placed on the transport vehicle to ensure proper weight distribution and securement.

Check the equipment’s securement points for wear and damage.

If there will be little friction between the equipment and the transport vehicle (for example, metal crawler tracks on a metal deck), consider if friction devices are required. If you need them, get them before you begin the transportation.

If the item to be moved has rubber tires, check the pressure. Low pressure may cause the tie-downs to loosen.

Remove any excess aggregate, dirt, debris, or other materials that could fall or reduce friction during transport.

Have minimum tiedown requirements during transportation

  • If the loaded vehicle has crawler tracks or wheels, you should have at least four tie-downs to prevent the machine from moving around.
  • You can use a chain as two tiedowns provided it is appropriately linked to two anchor points with two binders and has slack in the middle, ensuring that a break in the chain does not affect each tiedown.
  • The total working load limits of the tie-downs must be at least 50% of the cargo’s weight. If the cargo weight is unknown, more tie-downs may be required.
  • You can attach the tie-downs near the front and back of the equipment, or
  • At the mounting locations of the equipment intended for that purpose.
  • Stop and inspect the load securement 50 miles into the journey, and every three hours or 150 miles thereafter. This is because the loads can move, and the tie-downs can become loose on bumpy roads and during acceleration and deceleration.
  • If you notice a problem, you should fix it before proceeding with the journey.
  • Be ultra-cautious when loading heavy equipment for transportation
  • Do not operate or load equipment you are unfamiliar with or cannot operate safely.
  • When possible, put the equipment against a vehicle structure to help prevent forward movement, unless weight distribution or securement considerations prevent this.
  • Attach securement devices cautiously to avoid damaging brakes, hydraulic lines, or cylinders.
  • Use edge protection to safeguard the tie-downs and equipment.
  • Whenever possible, utilize the equipment manufacturer’s designated connection points and adhere to the manufacturer’s securement guidelines.
  • Attach, each tiedown as close to the vehicle’s front and rear as possible, or to mounting points on the car built explicitly for that purpose.
  • Do not use any attachment point with doubtful strength or compatibility.
  • Chain is the primary tiedown method for large equipment and machinery. Ensure that no links are strained or have nicks.
  • Use direct tiedowns whenever possible, but remember that they require more tiedowns than indirect tiedowns.
  • Place chocks, cradles, wedges, or other measures against the wheels to keep wheeled vehicles from moving. These devices require security.

Protect the equipment after loading.

You should lower all supplementary equipment and moveable elements, such as hydraulic shovels, booms, ploughs, crane arms, etc., and secure them to the transport vehicle with tie-downs.

Accessories with locking pins or similar devices that prevent movement in any direction are not required to be secured with additional security measures.

Hydraulics alone are insufficient to secure auxiliary equipment.

If the equipment you are transporting has an articulation point, pivot, or hinge in its design, secure or constrain the vehicle or equipment to prevent articulation during transit.

Secure accessories and other things not attached to the equipment to the transport vehicle by the normal cargo securement rules.

Confirm the vehicle’s true height and breadth.

Perform all needed en-route security assessments.

Do a final inspection before transportation.

You should do the Level I inspection, a thorough 37-step examination of the vehicle and the driver’s credentials.

As part of the cargo security inspection, you should check the following:

  • Ensure that spare tires, loads, goods, tools, and dunnage are securely fastened and do not fall, blow, spill, leak the vehicle, or roll or shift while in transportation.
  • Make sure there are enough tie-downs for the weight and length of the equipment you are transporting.
  • Check for faulty tie-downs, which may be loose, torn, broken, crooked, or knotted.
  • Inspect the anchor points and buildings for damage.
  • Confirm that you are observing commodity-specific cargo security standards.

Know your limits

Even seasoned veterans can sometimes find transporting and operating heavy machinery difficult. Regardless of your instructions, never place yourself in a scenario that makes you uncomfortable.

If you are unsure about loading a machine on a slope or in hazardous conditions, get the help of professional heavy machinery movers VA. Staying calm and aware throughout the day will help you to be more productive and create a great working atmosphere for those around you.

When hiring moving companies, don’t hire the first one you come across. Instead, you should take your time and find a reputable one with a proven track record.

When hiring, ask them to provide proof of having previously handled a similar project. This way, you will be sure that you won’t land into problems and will have an easy time.

Guide to Moving Heavy Machines with Precision and Care

heavy machinery moving

Moving heavy machinery can be challenging and dangerous, but it can be done safely and efficiently with the right planning and preparation. Here are some tips and best practices to keep in mind when moving heavy machines:

Choose a reputable and experienced heavy machine moving company

The heavy machinery moving company can make or break your project, so be cautious when hiring. As a rule of thumb, hire a reputable and experienced moving company that knows what it’s doing.

Many people make the mistake of hiring the first company they see in the search results. This is wrong. The best way to do it is to research and find at least five or more companies and then schedule interviews with them.

As you are interviewing the companies, Look for companies with a proven track record of safe and successful heavy machine moves.

Besides doing your research online, you can also ask colleagues, friends, and other businesses in your industry for recommendations on heavy machine moving companies.

Regardless of how you find the company, ensure it’s licensed, insured, and compliant with all relevant regulations and standards.

Have a solid plan and prepare for the move

You can’t just wake up and decide to move the machinery—you need to have a  detailed plan that includes a timeline, logistics, and any special requirements or considerations for the move.

Work with the moving company and devise a plan and logistics for the move, including the route, necessary permits, and potential obstacles or challenges.

As a rule of thumb, ensure that the machinery is properly prepared for the move, including securing loose parts and disconnecting any power or fuel source.

To be on the safe side, closely monitor the move to ensure that it is done safely and efficiently, and be prepared to address any issues that may arise.

Use the right equipment.

The best equipment for moving heavy machinery depends on the specific machinery being moved and the conditions of the move. In general, however, some common pieces of equipment that may be used for moving heavy machinery include:

Heavy-duty trailers or lowboy trailers, which are designed to carry heavy loads and can be attached to a truck or other vehicle

Forklifts or cranes, which can be used to lift and move the machinery

Skates or rollers can be placed under the machinery to make it easier to move

Straps or chains can be used to secure the machinery during the move

Dollies or carts, which can be used to move smaller or lighter pieces of machinery

Choosing the right equipment for the job is essential to ensure that the machinery is moved safely and efficiently.

Thankfully, if you are working with a moving company with heavy machinery experience, you will have an easy time telling the best equipment to use for your specific needs.

Protect your machine

To protect heavy machinery during transport, you should observe the following tips:

Secure any loose parts or attachments on the machinery to prevent them from moving or falling off during transport.

Disconnect any power or fuel sources to prevent accidents or damage to the machinery.

Use straps, chains, or other secure fasteners to secure the machinery to the trailer or other vehicle. Make sure the fasteners are properly tightened and will not loosen during transport.

Use skates or rollers to support the machinery and make it easier to move. This will help prevent damage to the machinery and make it easier to load and unload.

Cover the machinery with a protective tarp or other material to protect it from the elements and prevent debris from getting inside.

Monitor the machinery during transport to ensure that it remains secure and is not damaged. Be prepared to address any issues that may arise during the move.

Follow safety protocols

Ensure all workers involved in the move are trained and experienced in heavy machine moving and follow all safety protocols and guidelines to prevent accidents and injuries.

For example, all heavy machinery movers DC should use appropriate personal protective equipment (PPE), such as hard hats, gloves, and safety glasses, to protect themselves and others from potential hazards.

How Do You Move A Heavy Machine?

Do you have a heavy machine and you are wondering how you can move it? There are plenty of ways to go about it. Some of these ways include:

Using a bulldozer

The bulldozer is an excellent machine to move your heavy machinery. The beauty of it is that it’s powerful, so it will easily push the heavy weight to your desired location.

If you are doing the moving yourself, you will need to hire a bulldozer from your local heavy machinery movers. When doing it, be cautious of the one you choose.

You have two options: track or wheeled dozer.

From the name, a track dozer has tracks instead of wheels, which makes it an excellent choice when looking to move your heavy machine in soft soil.

On the other hand, a wheeled bulldozer does everything a tracked bulldozer can but on nice solid ground. This means you should go for this when you want to move your heavy machine on decent ground.

There is no right or wrong bulldozer that you can use. It all depends on the equipment you are moving and the conditions of your location.

Utility machine skates

These are perfect for moving machines of medium load, and they make excellent alternatives for cranes or forklifts.

When using the skates, remember that they have a weight capacity of 37.5 tons. They also work best when moving your heavy machinery in straight lines or turns.

Roller dollies

These are best suited for heavy but not oversized equipment. There are a variety of dollies in the market, so take your time and find one that is right for you.

Their beauty is that they require less power as they have a central load-bearing plate. These dollies can move up to 15 tons and rotate to 360 degrees when properly maintained.

When moving your machinery using the dollies, always use a ratchet strap to help secure the equipment and prevent accidents.

Crane

A crane is an excellent choice if you are moving your machinery up or over a short distance. Like dollies, many types of cranes are in the market designed for different applications.

For example, if you are looking to move your heavy equipment upwards, a tower crane would be the ideal choice, but if looking to move it vertically over a short distance, a mobile crane would be the best choice.

If you aren’t sure about the right crane to get, seek the services of an expert.

A plan

No, this is not a machine you can use to move your heavy machinery, but you need an expert plan to move your unit.

You need to know the right unit to accomplish your work and the right route, among many other details. Remember that without a solid plan, you will lose time, money, and plenty of opportunities to be strategic in how you go about it.

Again, if this is your first time going about it, get the input of a professional.

To get your machinery to your desired venue on time and with as little disturbance as possible, plan to move it when there is little traffic. An ideal time would be on the weekends when most people are in their homes.

You also should always take the shortest distance possible.

To avoid complications, have all the necessary paperwork before you begin the big move. You don’t want to put your machine on the side of the road upon realizing that you don’t have some vital documents.

You will always have risks when moving heavy machinery, so you can’t avoid them. The best you can do is to prepare for it. A good rule of thumb is to have insurance for the machine.

This way, you are sure that in the event of an accident, your insurance company will step in and settle it. You don’t want to be in a situation where you leave everything to fate, as things sometimes don’t go as planned.

Parting shot

These are tricks on how to move your heavy machinery. You can move the machine yourself but work closely with expert heavy equipment movers VA for the best outcome.

7 Safety Tips For Moving Heavy Machinery

According to heavy machinery moving companies, safety is one of the most important factors to consider when moving any heavy machinery. And for you to ensure you are safe when moving the machinery, you need to consider several tips that include:

Work with the right professionals

Everything begins here. There is no way you are going to have a great experience if you work with the wrong people. Working with the right people begins with the moving company you hire.

If you hire the wrong company, you won’t find experienced professionals who know what they are doing.

Before you decide to work with any company, take your time to research the company and ensure that the company knows what it’s doing. This calls for you to ensure that the company has handled similar projects in the past. The last thing you want is a new company doing a trial run with you.

Besides the new company failing to have the right tools for the job, chances are also high that it won’t have the right people.

An ideal company should have successfully moved several similar machines. This way, you are sure that it will expertly move your heavy machinery.

Undertake thorough inspection before the move

Before moving, thoroughly inspect the machine you are moving and the moving vehicle. For the machine, you want to move, ensure that you have switched it off and there isn’t the risk of it accidentally coming on.

You also need to ensure that it’s strongly strapped into place with high-quality ratchet straps.

For the transporting vehicle, inspect the tires for any form of damage. Also, check the fluid levels, booms, hoses, and other components for damage signs. If there is any sign of damage, it’s time to replace the part.

Have a clear plan

Besides the plan helping you stay organized, it also comes in handy in protecting you from getting into accidents. When you have a clear plan, you know what you need to do, which prevents you from making hasty decisions that might land you into problems.

With a clear plan, you know the right routes, the equipment to use, and any other vital information.

Of course, you can’t develop a clear plan if you don’t know what to do, can you? To have an easy time coming up with a plan, work with an experienced company that will explain what to do and the process to achieve your desired results.

Use the three-point mounting and dismounting rule.

People have been hurt and even machines damaged as a result of careless mounting and dismounting of the heavy equipment. To avoid accidents on your site, use the three-point rule.

Use two hands and one foot or two feet and one hand to mount or dismount the heavy machinery.

Be cautious when loading and unloading the machine

Besides observing the three-point mounting and dismounting rule, you need to be ultra-cautious when loading your heavy equipment. As a rule of thumb, ensure that the transport vehicle sits on level ground. This way, you are sure that the vehicle can’t roll or slide.

It’s also wise to have a spotter on the site to inspect the loading and unloading and identify any problem that might be present, and prevent it before it turns deadly.

Look out for hazards before you start work.

You might be using the most experienced moving company, but if you aren’t keen on the hazards in the area, you stand having an awful heavy machinery moving experience.

Before loading the machine, look out for overhead and underground dangers such as gas lines, cables, and even hydro wires.

It will even be better if you can get a map of the area you are working in.

Know and obey the load limits

Every machine has a load limit, and you should be cautious about it as exceeding it will put yourself, your moving vehicle, and other people on the site in great danger.

Heavy equipment movers DC recommend you keep a close eye on the capabilities of your moving vehicle. You should also double-check the weight of the equipment you are looking to move and ensure that it’s not too heavy for your vehicle.

5 Reasons to Hire a Heavy Machinery Moving Company

crane moving

There are plenty of reasons you should consider hiring heavy machinery moving company to move your heavy equipment. Some of these reasons include:

To replace the machine

Like any other thing, machines have a lifespan, and once they have crossed their threshold, you have no other way out other than to replace them.

You can also decide to replace the machine after it has become obsolete or damaged beyond repair.

You can hire a heavy machine moving company to help you move the damaged or obsolete machine from the factory to the storage area. The machinery mover will also help bring in the new machine.

To move the machine within the building.

This is known as in-house movement, and it involves moving the heavy machinery from one area to the next, often to create more space or increase efficiency and production.

When you hire the machinery movers, they use the best tools, usually forklifts or air bearings.

To move the heavy machinery across the country.

Sometimes you might be interested in moving your heavy machinery from one factory to another across the country.

While you can buy a completely new machine for the new production line, this isn’t always possible due to limited resources.

Hiring a moving company to move the heavy machinery is much cheaper than buying a new one, which, as you can tell, saves you a lot of money.

When looking to discard the old equipment

While some people store their old machines so that they can use them for parts, others opt to discard their obsolete units altogether.

If this is you, you need to hire a company that will move the heavy machine from your place of work to the area where you want to discard it, usually a scrapyard.

When you are looking to upgrade the machine

For machines to perform at their best, you need to upgrade them. This calls for you to replace the old parts with new ones. You can replace large to small parts depending on the upgrade you want to make.

When looking to upgrade large parts, you may need heavy machinery moving company to help you move the large machine to an area where you can easily work on it.

What should you look for when hiring a machinery moving company?

To get the most from the moving company, you need to hire the right one. What should you consider when hiring?

Experience of the company

How long has the company been around? It’s important to know this as the older the company, the more experienced it is, hence the higher the chances of it providing you an excellent service.

You should work with a company providing heavy machinery moving services for years. This way, you are sure that the company will professionally move your heavy machinery without any hiccups.

Equipment that the company uses

You should know that the equipment the moving company uses to move the heavy machinery influences the speed at which it does it and how safely the process proceeds.

As a rule of thumb, you need to hire a company using the latest equipment. You don’t want to work with a company using old tools that keep breaking down.

Reputation

You don’t want to work with a company with a bad reputation, do you?

Unlike years ago when you could hire an awful company without knowing, things have rapidly changed, and now you can easily find out how reputable a company is, simply by googling the company.

Most people have embraced leaving reviews on various review sites like Facebook, Google, and Yelp.

If you want to know the company’s reputation, you simply need to search for the company name online, and you will find out what the previous customers have to say about it.

You should work with a company with a stellar reputation. The last thing you want is working with heavy equipment movers MD that is a part of a problem, instead of being a solution.

While you should always go for highly reputable companies, you should note that a perfect 5-star record is hard to get, even for the most experienced. If a company has a 4.5-star rating, that’s an excellent company to work with.

How to Move Heavy Machinery

If you are looking to move heavy machinery, you need to do several things to have a successful move. These things include:

Have a plan

The same way you can’t start a construction project without a plan is the same way you shouldn’t begin your heavy machinery moving without a plan.

Besides finding a reputable heavy machinery moving company, you also should find the relevant permits for the big move and the best roads to use for your move.

Have a budget

How much are you looking to spend on your move? This will be influenced by the machinery you are looking to hire the company you want to work with, among many other things.

If this is the first time you are doing it, get a professional who knows what they are doing. They will guide you from finding the right machine to the amount of money you should set aside for the project.

Use the right equipment.

The machine you use for the work is dependent on the type and size of heavy machinery you will be moving.

If the machine is large, you will need a long bed truck to transport it and vice versa.

When researching the companies to work with, you should consider the trucks that the company has and other helper machines the company has. These include:

Hand truck dolly: This makes the most sense when you are looking to move a machinery that isn’t oversized but is heavy. There are many types of moving dollies in the market, but this isn’t important. The important thing to pay attention to is the load capacity of the dolly.

Of course, it should be able to carry the weight of your machinery.

Air bearings: If you have a hefty machine weighing several tons, you should ensure that your mover has air bearings. Here the mover uses an air compressor to inflate the bearing elements connected to the platform, placed under the equipment.

Due to the continuous airflow, the bearings lift the equipment across the floor.

Although you can use the air bearings to lift any machinery, they are best suited for machines with uneven weight distribution.

Forklift: Any sensible heavy machinery moving company worth its salt should have a forklift to haul around your heavy machinery. The mover should use the forklift to load the machinery up on the truck and offload it when you get to your destination.

Other machines that a mover should have include: skates, roller skids, lift buddy, lifting straps, toe jacks, and others.

As you research, find out the tools and equipment the moving company should have to do the work properly.

As a rule of thumb, don’t work with a company without the right tools, as they will most likely mishandle your machinery. There is also the risk of the mover dropping your expensive heavy machinery and damaging it. And you don’t want this, do you?

Move at the right time.

You will have the right moving company and equipment but fail to have a pleasant experience when you move at the wrong time.

To be on the safe side, schedule your moving when there is little traffic, reducing the chances of accidents happening.

Heavy machinery isn’t allowed to travel or touch public roads, so you need to plan the right roads to use and do the moving with as little disturbance as possible.

The key to getting your moving right is to take your time and schedule enough time. Of course, due to the size and weight of the machine, you should expect delays, so the last thing you should do is start finding heavy equipment movers DC a few days before the commencement of your project.

This is because you will be in haste, which increases the chances of making costly mistakes.

The right thing to do is start planning for the move at least three months ahead. This way, you have time to find the right mover with all the right equipment. You also have an allowance on time, should delays happen.

The Secret To Moving Heavy Machinery

moving heavy machinery

When you are looking to move heavy machinery, you have to do all the right things for your project to be a success. Which are these things you should do? Here they are as given by heavy machinery moving experts:

Put your ducks in a row

For your moving to be a success, you have to ensure that you have a solid plan for doing the moving. This calls for you to ensure that you know everything there is to know about the move beforehand.

You should know the right machine you need for the move and the weight and height of the equipment you are hauling.

In most cases, when you are moving a dozer, backhoe, dump truck, or any other large equipment, you need a special permit. The permit will shed more light on how to move the equipment. For example, it will dictate whether you need additional escort vehicles to drive with the heavy hauler and alert other drivers about the load. Ensure that you get this permit as part of your planning.

If you need to use unique roads that are less trafficked, you should know this before starting the move.

Work with the right moving company.

There is no way you will have a successful move if you work with the wrong company. As a rule of thumb, the company you work with should have the right hauler. Before you go to the moving company, you should know the size of your machine both in height and weight.

Before you sign the moving contract, ensure that the trailer provided by the company is large enough to accommodate the height and weight of your machine. The hauler should also be low enough to meet the height requirements in the roads you will be using.

Besides the trailer having the capacity to haul your machine, it also should be in good shape. The last thing you want is the trailer breaking down in the middle of the road.

While you are at the rental company’s offices, pay close attention to the trailer and ensure there are no leaks points or signs of damage that can compromise the securement of your machinery.

Also, confirm that the trailer is free of debris, which can come loose when traveling and cause damage to other vehicles on the road, putting you into trouble.

Safely load and secure your heavy machinery.

After you have confirmed that the trailer is right for your machinery, the next thing to do is load the machine to the trailer. Regardless of who is doing the loading, ensure that you do it in accordance with DOT regulations.

To avoid accidents, use enough and appropriate securing devices. Some of the tips to consider for that perfect securing include:

Use chains where possible. If you can’t find chains, use steel strapping.

Tightly secure tie-downs. This requires you to attach the tie-downs using clamps, hooks, and ties that can’t get loose during transport. Ensure that the tie downs are tight and don’t damage weak sections that can break during transportation.

Secure the wheels with chocks or wedges to prevent rolling during transport.

If possible, use friction devices such as friction mats and other devices that provide better traction and prevent sliding.

As you secure the machine, be keen and choose the right attachment points. Be keen and only use the right points as using the wrong ones could spell doom. There is the risk of breaking or damaging a part of the heavy equipment or failing to keep the equipment properly secured while on the road.

For peace of mind, double-check the attachment points and confirm they are properly in place and can’t get damaged.

You don’t have to transport the heavy equipment as a whole

Transporting heavy equipment doesn’t come cheap. It’s even more expensive when your machine is oversize. If your machine is too heavy, talk to heavy equipment movers DC and find out whether you can remove the work tools and attachments and ship them separately to save on costs.

If your equipment is too tall, consider retracting booms, buckets, or attachments to reduce the equipment height hence reducing the transportation costs and safety risks.

Which Heavy Machinery Can You Move?

Although you can hire heavy equipment movers and move any machine you want, there are some machines that are more common than others. These include:

Bulldozer

The bulldozer is a classic heavy machine used in different applications. When you have a construction project, the bulldozer pushes large quantities of landmass to your desired area. You can also use it to clear large amounts of dirt or soil. And if you have a junkyard, you can hire it to push scrap metal onto the processing machines or simply clear the area.

There are two types of bulldozers: track and wheeled bulldozers. The track dozer has tracks instead of wheels, and it’s excellent for use in soft soil. The tracks easily move around muddy or soft areas as the machine’s weight is spread.

The wheeled bulldozer does everything a tracked bulldozer does, but it works better on nice solid ground. Since this bulldozer has wheels, it moves much faster. If you are working on decent ground, this is the bulldozer to go for.

Bulldozers require specialized equipment to move them from one place to the other, so you should ensure that you hire the right company to help you out. As a rule of thumb, only hire experienced companies that have been around for some time.

Asphalt pavers

You use asphalt pavers to lay down asphalt to your desired ground surface. Large construction companies use it for roads, lots, parking, bridges, and garages. The pavers come in all sizes depending on the job you want to undertake.

If you want to lay the pavers in a large area, you should get a large machine and vice versa.

You should note that the machine doesn’t do the job by itself—it purely lays down the asphalt on the road in your desired width. This means that it needs another machine to bring the asphalt to it.

After laying down the asphalt, it compacts the soil to keep the asphalt in place. For the best results, you should always follow it up with a roller.

Again, like the bulldozer, you need specialized machinery to move it to your desired site. To avoid damage, work with a company that has successfully moved pavers before.

Roller

The roller is one of the most common heavy equipment you can come across. The machine comes in handy when you are having a project with a large floor area. From its name, the roller rolls throughout your desired area to ensure that the ground is well compacted, which ensures that the floor is strong and smooth.

Backhoe loaders

It’s the most versatile heavy machines you can come across. You should consider getting this machine when you have a large project that involves lifting, digging, and loading.

The machine comes with a loader, tractor, and rear hoe.

One of the most common applications of the loader is lifting heavy materials such as sand, rocks, and gravel then placing them onto a dump truck or any other area.

Cold planers

You use cold planers when replacing the pavement. The machine has a large drum inside with ridges that grind off the asphalt or concrete. The cold planers then push out the ground material through a conveyor belt towards your desired loading machine.

Although, the machine is so powerful, it has plenty of built-up features that minimize the worksite hazards. For example, it shoots water onto the drum at regular intervals, which prevents extreme dust and heat you get during regular grinding.

Valuable tips when moving heavy machinery

Regardless of the machinery, you are looking to move, you should hire the right movers. The last thing you want is the machine failing to reach your desired site at the right time or, even worse, getting damaged on transit.

If you hire the machine from a rental company, you are better off working with the heavy machinery moving DC company recommended by the rental company. This is because they might have worked together before, so the moving company is conversant with the machinery, so they will most likely move it professionally and with as little damage as possible.

To protect yourself, only work with an insured company. This way, you are sure that you don’t carry the responsibility in the event of an accident or damage—the insurance company does.